Use and daily maintenance of continuous microwave drying and sterilization equipment

Due to different industries, different enterprise product characteristics, different production environment, the problems encountered by using microwave drying equipment are not the same, such as conveyor belt burning, transformer burning and so on. In order to avoid unnecessary errors, the correct equipment operation process is as follows: 1. Before the equipment is put into production, check whether the working environment and line connection are normal;

Second, the tunnel equipment should check the tension of the conveyor belt by hand, which may lead to the loosening of the conveyor belt after a long time of production;

#First, turn on the transmission system and the cooling electrical part of the fan, and observe whether the unit of the microwave device and the cooling system are abnormal;

After the microwave drying equipment is powered on, it should be idle for a short time after normal operation, and then add the material to be treated;

5、 In the process of production and use of microwave equipment, technicians should pay attention to the change of the number. When the number fluctuates abnormally, they should immediately press the emergency stop button of the equipment.

At the end of the day, first cut off the power supply, check whether all parts of the wires are exposed or damaged, and then clean up the equipment sanitation and dust.

The environmental sanitation of production workshop should be paid attention to at ordinary times.

Continuous microwave drying and sterilization equipment

Microwave oven drying device

In addition to the correct operation process, we should also pay attention to the usual maintenance. How should we do the routine maintenance of microwave drying equipment? Here is a brief introduction:

Keep the production environment dry. Microwave ovens and other electrical appliances are made of metal. The humidity in the factory is high and the surface is wet. After the power is turned on, the steam attached to the surface of metal electrical appliances is easy to cause short circuit, especially in the rainy season in the south, so it is necessary to carry out dehumidification treatment as soon as possible.

2. According to the sanitary conditions of the production site and the use environment, reasonably arrange the dust removal work of equipment, electrical appliances, box, conveyor belt and other parts, especially pay attention to the air-cooled equipment. If the magnetron and transformer of microwave equipment are sticky with thick dust, the heat dissipation effect will be very poor, and it is easy to burn out after working for a long time.

3. Open the door of the microwave heating box regularly to clean up the residual debris in the door, so as to avoid the stress reaction caused by the excessive accumulation of the column;

When installing the machine, it must be learned by a specially assigned person. Electrical engineer is better, so he can be familiar with equipment maintenance and simple maintenance work. A skilled equipment operator can better use the microwave drying equipment and create more profit space for the enterprise.